GMTO Connect Pro Remote Diagnostics (2024)

Product Description

GMTO Connect Pro Remote Diagnostics
The new pro model now has the following features

  • DOIP ready
  • CAN FD ready
  • 4 CAN bus channels
  • Integrated WIFI
  • Wired internet option

We can only offer this tool and service in Ireland

And due to demand we can now only supply in the following cases

  • To workshops that have a up to date diagnostic tool from Ryan’s Automotive
  • To workshops that are part of the Ryan’s Automotive workshop assist club

Programming, coding & automotive diagnostics remotely via unique interface

GMTO and Ryans Automotive is offering the Irish automotive aftermarket a unique diagnostic solution, providing workshops and motor vehicle repairers with the certainty they need when it comes to the diagnostics, programming and coding of vehicle electrics. We also have the ability to help workshops to diagnose complex faults. The GMTO connect interface is used to establish a remote connection to the vehicle, which means that the vehicle itself stays right in the workshop.

How it works: The GMTO Connect interface and a device with internet access (computer, laptop, tablet etc), is connected to you car which does not have to leave your workshop. The communication between the car and the remote GMTO Connect specialist is done entirely via the internet network. The GMTO Connect is connected to the OBD plug on one side, and then a network cable from you router is connected to the remote and then via any PC or tablet a remote diagnostic support request ticket can be started, As soon as the connection with the car is recognized then a Ryan’s Automotive diagnostic specialist can then connect to the car remotely with there huge array of diagnostic equipment.

Just think of it like its a very long diagnostic cable that allows us to connect to a vehicle anywhere in Ireland with our diagnostic equipment

Easy to Use: Plug the OBD cable into the vehicle, select the vehicle and speak to a Ryan’s Automotive technician via the app to complete the work.

Wide Range of Remote Services:

  • General Diagnostics,
  • Service resets
  • Electric parking brake (pads replacement)
  • injector coding
  • SCR and DPF diagnostics and resets, relearns, regeneration and adaptions
  • Other engine management components resets and adaptions
  • Key programming
  • Programming tow bar electrics,
  • Body computer coding and configurations,
  • Power Steering Module Coding,
  • ECU coding/Configuration
  • Steering lock coding
  • Steering angle calibration
  • TPMS sensor learning (in some cases a activation tool will be needed at the remote side)
  • Air suspension calibrations and coding/configurations
  • ADAS diagnostics
  • And much more,

But as with any automotive diagnostic work there is always some limitations, NO ONE CAN DO EVERYTHING AND SUCH CLAIMS NEED TO BE TAKEN WITH A PINCH OF SALT

Some of the limitations are

  • Wont work with some older vehicles that use old diagnostic protocols
  • Wont work with older vehicles that does not have a 16 pin diagnostic socket
  • Wont perform any coding functions on BMW vehicles that require coding trough the MOST bus diagnostic connection
  • Not recommended for software updates on vehicles due to the risk of a issue when trying to transfer a larger file over the internet
  • And if Ryan’s Automotive or GMTO dont have the necessary diagnostic software to complete the function

Choice: Huge Range of Diagnostic Equipment at your fingertips without the cost or hassle. GMTO Connect – The hybrid of diagnostic tools

Live Technicians: Live Technicians from Ryan’s Automotive and GMTO Holland now available in your workshop

Example of use:

A workshop in Cork has a vehicle in his workshop and needs to replace steering lock and he needs to perform the steering lock coding

He tries one of his own diagnostic tools and he does not have that function listed in his diagnostic tool for that vehicle

Then he tries his other diagnostic tool and this wont do it either,

Now he has a few options

Option 1: Tell his customer he will have get the vehicle towed to a different workshop to get the steering lock coded

Option 2: Take the car to a workshop or a dealer with a tow truck to get the job completed

Option 3: Have a mobile diagnostic person call to his workshop to perform the coding

The 3 options above will get the job done but creates extra hassle, delays and expensive to either the customer or the workshop

But with the GMTO connect the workshop would have been able to complete the job without the vehicle having to leave his workshop

Contact us for more information and some examples of how this system can help your workshop

Terms and conditions:

  • The workshop must have internet speeds exceeding 30Mbps download and 15Mbps upload
  • Workshop must have a minimum 100amp battery support unit
  • Must be a registered workshop in Ireland
  • Customer must be present at the vehicle at all times during the connection to cycle ignition etc
  • User must have SERMI certification (when SERMI is launched in Ireland)
  • Other terms and conditions apply, contact us for more information

Note the diagnostic work is done from our offices in Ireland except in cases where we dont have the necessary software to perform the function and in these cases we can with your consent pass the ticket to GMTO

Pricing:

  • GMTO connect remote interface €888 + vat
  • Yearly subscription €150 + vat
  • Pay per use, POA

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

      GMTO Connect Pro Remote Diagnostics (2024)

      FAQs

      What is remote vehicle diagnostics? ›

      Remote diagnostics leverages the information gathered from the continuous monitoring of a vehicle and promptly identifies and reports potential issues.

      What are remote diagnostic connections? ›

      Remote diagnostics is the act of diagnosing a given symptom, issue or problem from a distance. Instead of the subject being co-located with the person or system done diagnostics, with remote diagnostics the subjects can be separated by physical distance (e.g., Earth-Moon).

      What are some examples of the use of remote diagnostics? ›

      Remote patient monitoring uses devices and software that enable the continuous monitoring and analysis of a patient's vitals and condition outside a conventional clinical setting. For example, blood pressure, glucose, oxygenation levels, heart rate, and temperature.

      What are the benefits of remote diagnostics? ›

      Remote monitoring and diagnostics can significantly reduce the time needed to work on your machines since the technicians are already informed of the issue well ahead of time, and catch it before it becomes a significant problem. Reduces costs. This is the most obvious benefit of remote diagnostics.

      Are remote connections safe? ›

      If you don't have proper security solutions in place, remote connections could act as a gateway for cybercriminals to access your devices and data. Hackers could use remote desktop protocol (RDP) to remotely access Windows computers in particular.

      What is remote device monitoring? ›

      Remote monitoring is the process of using connected equipment to gain live insights into equipment use and performance.

      What are the three types of remote connections? ›

      There are broadly three types of remote access methods: direct, indirect and VPN. Direct remote access is the most common and simplest type of remote access. It involves using a computer or other device to connect directly to another computer or device over the internet.

      What does a vehicle diagnostics do? ›

      A diagnostic check is a process of checking a vehicle's systems and components to help identify issues and rectify them. Modern vehicles are equipped with extensive computer networks that can provide information on the engine, brakes, and other related systems.

      What is Remote Desktop diagnostics? ›

      Remote diagnostics allows you to quickly pull the computer's internal details (i.e., serial number) with one click to one report. Instead of asking the end-user for the information, you can easily find what you need and get back to troubleshooting.

      What is a remote control vehicle used for? ›

      Remote-control vehicles are used in law enforcement and military engagements for some of the same reasons. Hazard exposure is mitigated for the operator of the vehicle, who controls it from a location of relative safety. Remote-controlled vehicles are also used for bomb disposal.

      What is remote monitoring and diagnostics? ›

      Remote Monitoring and Diagnostics is a maintenance operations and management system that uses sensors, software, and other technologies to monitor and diagnose equipment and systems remotely.

      References

      Top Articles
      Latest Posts
      Article information

      Author: Jeremiah Abshire

      Last Updated:

      Views: 5432

      Rating: 4.3 / 5 (54 voted)

      Reviews: 93% of readers found this page helpful

      Author information

      Name: Jeremiah Abshire

      Birthday: 1993-09-14

      Address: Apt. 425 92748 Jannie Centers, Port Nikitaville, VT 82110

      Phone: +8096210939894

      Job: Lead Healthcare Manager

      Hobby: Watching movies, Watching movies, Knapping, LARPing, Coffee roasting, Lacemaking, Gaming

      Introduction: My name is Jeremiah Abshire, I am a outstanding, kind, clever, hilarious, curious, hilarious, outstanding person who loves writing and wants to share my knowledge and understanding with you.